2006 Honda ST1300/ A SET-UP INSTRUCTIONS

download
Remove the carton cover. The ST1300/A is crated in one of two ways. You may receive either one. Covered crate: Cut the strap and remove the carton cover. Remove the inner cardboard frame cover. Uncovered crate: When stacking crates, protect the motorcycle from falling objects and bad weather. 2. Check for damage. Check the unit for hidden damage. If you find damage, follow the instructions on the Delivery and Damage Claims Guidelines wall chart (Reorder No. S0477) before proceeding. 3. Remove the side braces, wheel, loose parts cartons, and crate frame. Remove the ties securing the front wheel and loose parts cartons. 3. Remove the side braces, wheel, loose parts cartons, and crate frame (cont.). Remove the bolts and side braces, being careful not to damage the front wheel. Remove the loose parts cartons. Keep the You and Your Motorcycle Riding Tips & Practice Guide and hand deliver to the customer at the time of delivery. Remove the nuts, plate, and bolts. Using two people, carefully remove the crate frame, being careful not to damage the motorcycle Remove the motorcycle from the crate base. Install lifting slings on the engine guards and grab rails as shown. If necessary, use a spreader board to prevent the slings from damaging the motorcycle. Lift the slings just enough to remove the slack. Loosen the caliper bolts, axle bolt, and axle pinch bolts. Remove the washer bolts, and lower shipping bracket from the crate base. Discard the washer bolts